swiing® ingenious parts

Mofa parts thought through, perfected.

Rethinking moped parts: swiing® Ingenious Parts stands for innovation, precision, and performance. High-quality high-end and shadow tuning parts take original parts to the next level - for an optimized riding experience and maximum quality.

Seat	Frauenfeld, Switzerland
Status	Active
Foundation	2014

Maximum performance
High-end tuning parts for outstanding performance and driving dynamics.
Shadow tuning
Discreet tuning parts, difficult to identify and inconspicuous.
Precision & quality
Developed with Swiss engineering.
Easy assembly
Well-thought-out solutions for quick and easy installation.

Innovation meets Swiss precision

swiing® Ingenious Parts combines innovation with Swiss perfection. Our goal: to rethink original parts and take them to the next level. With high-end and shadow tuning parts, we offer cutting-edge technological solutions for riders who value quality, performance and durability.

More than just spare parts

Our parts are more than just replacements – they are an evolution. Developed using the latest technology and the highest standards of functionality, swiing® Ingenious Parts enable an optimized driving experience. Because your moped deserves more.

shop-life-brands-swiing_ip-03-L-ingenious

The best products from swiing® Ingenious Parts More swiing® Ingenious Parts

swiing® ingenious torsion spring clutch lever reinforced +20% | Z50

For: Puch

10389

swiing® ingenious torsion spring clutch lever reinforced +20% | Z50

Spring design: Torsion spring · Manufacturer: swiing® ingenious parts

EUR 10.90

swiing® ingenious puller L17 / BO15 / E15 shoulder bearing

For: Puch · Sachs

10942

swiing® ingenious puller L17 / BO15 / E15 shoulder bearing

Diameter: 24 mm · Diameter: 40.3 mm · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Width across flats trigger: 8 mm · Width across flats trigger: 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Total length: 120 mm · Area of application: (Dis)assembly tool · Surface: galvanized (blue) · Number of components: 1 pcs

EUR 53.80

swiing® ingenious pull-wire starter PVL ignition | Puch E50

For: Puch

10639

swiing® ingenious pull-wire starter PVL ignition | Puch E50

Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Ignition system: PVL · Ø outside: 130 mm · Number of fixing points: 2 pcs · Total length: 170 mm · Hole spacing: 138 mm · Height: 80 mm · Width: 150 mm

EUR 183.70

Inox

For: Puch

11352

swiing® ingenious intake manifold Gilardoni italkit Inox

Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: No · Ø inside: 21 mm · Ø External connection: 24 mm · Mounting type: Screws · Hole pattern [mm]: 60 x 35 · Number of fixing points: 4 pcs · Total height: 55 mm · Height flange center hole: 42.5 mm · Total length: 80 mm · Area of application: Tuning

EUR 83.20

Inox

For: Puch

11326

swiing® ingenious spring gearshift (reinforced, +20%) Inox | Puch X30 Z50

Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel)

EUR 18.30

swiing® ingenious lever for decompressor | Sachs 503 (A1782)

For: Sachs

15083

swiing® ingenious lever for decompressor | Sachs 503 (A1782)

Manufacturer: swiing® ingenious parts · Color: silver · Alternative version of the Pony OEM number: A1782 · Alternative version of the Sachs OEM number: 0248 149 000

EUR 24.40

swiing® ingenious spare rope Ø 4 mm rope pull starter

For: Puch · Piaggio

15534

swiing® ingenious spare rope Ø 4 mm rope pull starter

Manufacturer: swiing® ingenious parts · Color: black · Ø outside: 4 mm · Total length: 1100 mm

EUR 6.00

For: Puch

15778

swiing® ingenious piston 44 mm | Puch

Manufacturer: swiing® ingenious parts · Nominal diameter: 44 mm · Ø outside piston (A): 43.96 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.5 mm · Curvature (D): 3.6 mm · Total piston height (E): 52.6 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Weight piston kit: 91 g

EUR 55.00

For: Puch

15779

swiing® ingenious piston 45 mm | Puch

Manufacturer: swiing® ingenious parts · Nominal diameter: 45 mm · Ø outside piston (A): 44.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.4 mm · Curvature (D): 4.6 mm · Total piston height (E): 50.5 mm · Number of piston rings (F): 1 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.9 mm · Weight piston kit: 91 g

EUR 55.00

swiing® ingenious 16 mm intake manifold (Dell'Orto SHA) | Puch X30 NS, NL

For: Puch

19311

swiing® ingenious 16 mm intake manifold (Dell'Orto SHA) | Puch X30 NS, NL

Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø External connection: 19 mm · Hole spacing inlet: 38 mm · Ø inside: 16 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Area of application: Tuning

EUR 85.20

swiing® ingenious engine mount | Zündapp Belmondo

For: Zündapp Belmondo

19581

swiing® ingenious engine mount | Zündapp Belmondo

Manufacturer: swiing® ingenious parts · Area of application: Motor bracket · Material: Steel · Surface: galvanized (blue)

EUR 73.40

swiing® ingenious motor mount | Sachs 504

For: Sachs

19584

swiing® ingenious motor mount | Sachs 504

Manufacturer: swiing® ingenious parts · Area of application: Motor bracket · Material: Steel · Surface: galvanized (blue)

EUR 73.40

swiing® ingenious inlet seal Ø 15 mm | Puch X30 Velux

For: Puch

18149

swiing® ingenious inlet seal Ø 15 mm | Puch X30 Velux

Manufacturer: swiing® ingenious parts · Thickness: 0.5 mm · Place of use: Admission · Hole spacing inlet: 32 mm

EUR 3.55

swiing® ingenious reduction sleeve air filter 15 mm carburetor (23/20 mm) | Puch X30 Velux

For: Universal · Puch

18457

swiing® ingenious reduction sleeve air filter 15 mm carburetor (23/20 mm) | Puch X30 Velux

Manufacturer: swiing® ingenious parts · Material: Polyamide (PA) · Color: white · Total length: 15 mm · Ø inside: 20 mm · Ø outside: 23 mm

EUR 9.70

swiing® ingenious mirror mount M10 aluminum black

Universal

19887

swiing® ingenious mirror mount M10 aluminum black

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Clamping diameter: 22 mm · Total length: 52 mm · Width: 18 mm · Height: 55 mm · Thread size: M10

EUR 42.80

Hot

swiing® ingenious 15mm tuning set carburetor HG short | Sachs 503

For: Sachs

19135

swiing® ingenious 15mm tuning set carburetor HG short | Sachs 503

Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 62 · Mounting type: Flange · Mounting type: Plug connection clamped · Hole spacing inlet: 32 mm · Clamping screw torque (max.): 4 N/m · Area of application: Tuning

EUR 196.00

swiing® ingenious 15 mm carburetor set (Bing SRE) | Zündapp Belmondo

For: Zündapp Belmondo · Zündapp

19133

swiing® ingenious 15 mm carburetor set (Bing SRE) | Zündapp Belmondo

Manufacturer: GPO · Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Nominal diameter: 16 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 62 · Mounting type: Flange · Mounting type: Plug connection clamped · Hole spacing inlet: 40 mm · Clamping screw torque (max.): 4 N/m · Area of application: Tuning

EUR 147.00

swiing® ingenious chain whip / sprocket blocker "H415" 1/2 "x3/16"

Universal

19265

swiing® ingenious chain whip / sprocket blocker "H415" 1/2 "x3/16"

Holding area: 124 mm · Manufacturer: swiing® ingenious parts · Area of application: (Dis)assembly tool · Material: Steel · Surface: galvanized (blue) · Surface: rubberized · Total length: 380 mm

EUR 55.00

Set

swiing® ingenious tuning set 38 mm (with choice of exhaust) | Puch E50, ZA50

For: Puch

19615

swiing® ingenious tuning set 38 mm (with choice of exhaust) | Puch E50, ZA50

Nominal diameter: 38 mm · Manufacturer: GPO · Manufacturer: NGK · Manufacturer: swiing® ingenious parts · Manufacturer: swiing® revival parts · Displacement: 50 ccm · Ø piston pin (B): 12 mm · Outlet type: straight · Camouflaged: Yes · Area of application: Tuning

EUR 422.80

swiing® ingenious 16 mm intake manifold Bing SRE | Zündapp Belmondo (Type 247)

For: Zündapp Belmondo · Zündapp

19139

swiing® ingenious 16 mm intake manifold Bing SRE | Zündapp Belmondo (Type 247)

Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø External connection: 20 mm · Hole spacing inlet: 40 mm · Ø inside: 16 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Area of application: Tuning

EUR 48.90

swiing® ingenious piston ring 44x1.5 mm hard chrome-plated | Puch

For: Puch

20326

swiing® ingenious piston ring 44x1.5 mm hard chrome-plated | Puch

Manufacturer: swiing® ingenious parts · Surface: hard chrome plated · Nominal diameter: 44 mm · Piston ring impact: Internal fuse (IS) · Height: 1.5 mm

EUR 10.90

swiing® ingenious piston ring 38x1.5 mm hard chrome-plated | Puch

For: Puch

20322

swiing® ingenious piston ring 38x1.5 mm hard chrome-plated | Puch

Manufacturer: swiing® ingenious parts · Surface: hard chrome plated · Nominal diameter: 38 mm · Piston ring impact: Internal fuse (IS) · Height: 1.5 mm

EUR 10.90

swiing® ingenious 15 mm intake manifold & air filter | Sachs 50/2, 50/3, 50/4

For: Sachs

20304

swiing® ingenious 15 mm intake manifold & air filter | Sachs 50/2, 50/3, 50/4

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black-matt · Ø External connection: 20 mm · Mounting type: Screws · Hole spacing inlet: 31 mm · Area of application: Tuning · Ø inside: 15 mm · Number of fixing points: 2 pcs

EUR 97.90

swiing® ingenious 15 mm Bing SRE carburetor set | Sachs 50/2, 50/3, 50/4

For: Sachs

20303

swiing® ingenious 15 mm Bing SRE carburetor set | Sachs 50/2, 50/3, 50/4

Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Air filter connection: 52 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Mounting type: Flange · Mounting type: Plug connection clamped · Hole spacing inlet: 31 mm · Clamping screw torque (max.): 4 N/m · Area of application: Tuning

EUR 140.80

Inox

swiing® ingenious Rear Wheel Nut M14x1.5 SW19 Stainless Steel | Piaggio Ciao, SI, Bravo, Boxer

For: Piaggio

20516

swiing® ingenious Rear Wheel Nut M14x1.5 SW19 Stainless Steel | Piaggio Ciao, SI, Bravo, Boxer

Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Drive: External hexagon · Height: 24 mm · Nominal diameter (thread): 14 mm · Thread type: MF14x1.5 (fine pitch thread) · Width across flats: 19 mm

EUR 16.30

swiing® ingenious clutch springs reinforced (+20%) | Puch E50

For: Puch

10078

swiing® ingenious clutch springs reinforced (+20%) | Puch E50

Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Number of components: 3 pcs · Material: Spring steel · Surface: coated · Area of application: Tuning · Color: blue · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Total length: 28 mm

EUR 21.90

New

swiing® ingenious Clutch Spring Set, Reinforced (+50%) | Zündapp Belmondo, Bergsteiger

For: Zündapp

23210

swiing® ingenious Clutch Spring Set, Reinforced (+50%) | Zündapp Belmondo, Bergsteiger

Manufacturer: swiing® ingenious parts · Number of springs: 10 pcs · Area of application: Tuning · Alternative version of the Zündapp OEM number: 247-06.107 · Alternative version of the Zündapp OEM number: 281-06.101

EUR 67.30

swiing® ingenious Special Tool Set, Small | Sachs 502, 503

For: Sachs

21567

swiing® ingenious Special Tool Set, Small | Sachs 502, 503

Manufacturer: swiing® ingenious parts · Number of components: 8 pcs · Area of application: Special tool

EUR 134.70

swiing® ingenious Special Tool Set (Large Version) | Sachs 50/2, 50/3 (DE), 50/4 (DE)

For: Sachs

21568

swiing® ingenious Special Tool Set (Large Version) | Sachs 50/2, 50/3 (DE), 50/4 (DE)

Manufacturer: swiing® ingenious parts · Number of components: 15 pcs · Area of application: Special tool

EUR 325.90

swiing® ingenious exhaust manifold 32 mm black | Sachs 503

For: Sachs

22478

swiing® ingenious exhaust manifold 32 mm black | Sachs 503

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: varnished · Ø outside: 32 mm · Color: black · Mounting type: Bride · Ø External connection: 26 mm

EUR 55.00

swiing® ingenious bushing fork swing arm brass original | Piaggio Ciao

For: Piaggio

22290

swiing® ingenious bushing fork swing arm brass original | Piaggio Ciao

Material: Brass · Manufacturer: swiing® ingenious parts · Ø outside: 16 mm · Ø Bundle: 22 mm · Total length: 12 mm · Ø inside: 12.85 mm

EUR 7.25

swiing® ingenious 15 mm carburetor set camouflaged | Puch X30 Velux

For: Puch

21374

swiing® ingenious 15 mm carburetor set camouflaged | Puch X30 Velux

Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Air filter connection: 23 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 62 · Mounting type: Flange · Mounting type: Plug connection clamped · Hole spacing inlet: 32 mm · Area of application: Tuning

EUR 150.60

swiing® ingenious 19 mm PHBG intake manifold Speed Engine | Piaggio Ciao, SI, Bravo

For: Piaggio

22446

swiing® ingenious 19 mm PHBG intake manifold Speed Engine | Piaggio Ciao, SI, Bravo

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: graphite colors · Ø inside: 19 mm · Ø External connection: 24 mm · Mounting type: Screws · Hole spacing inlet: 36 mm · Number of fixing points: 2 pcs · Area of application: Tuning

EUR 36.70

Hot

swiing® ingenious bearing conversion kit cast front wheel | Piaggio Ciao, SI, Bravo, Grillo

For: Piaggio

21356

swiing® ingenious bearing conversion kit cast front wheel | Piaggio Ciao, SI, Bravo, Grillo

Manufacturer: SKF · Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Ø outside: 14.9 mm · Ø outside: 20 mm · Ø outside: 32 mm · Total length: 53.5 mm · Width: 9 mm · Ø inside: 11.25 mm · Ø inside: 15 mm · Ball bearing closed: Yes

EUR 36.20

swiing® ingenious piston rings Ø 44 x 1.5 mm black (pair) | Puch

For: Puch

20357

swiing® ingenious piston rings Ø 44 x 1.5 mm black (pair) | Puch

Manufacturer: swiing® ingenious parts · Nominal diameter: 44 mm · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Height: 1.5 mm

EUR 10.90

swiing® ingenious gasket set 44 - 45 mm cylinder | Puch

For: Puch

20557

swiing® ingenious gasket set 44 - 45 mm cylinder | Puch

Manufacturer: swiing® ingenious parts · Number of components: 4 pcs · Ø cylinder: 44 mm · Ø cylinder: 45 mm · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Tuning

EUR 12.10

swiing® ingenious wheel hub disc brake cast rim black | Puch

For: Puch

22269

swiing® ingenious wheel hub disc brake cast rim black | Puch

Manufacturer: swiing® ingenious parts · Material: Aluminum · Color: black · Surface: anodized

EUR 147.00

swiing® ingenious disc brake system cast rim | Puch

For: Puch

22271

swiing® ingenious disc brake system cast rim | Puch

Manufacturer: swiing® ingenious parts · Color: red · Ø outside: 230 mm · Thickness: 3 mm · Ø inside: 92 mm

EUR 269.50

swiing® ingenious brake shoes Ø 90 x 18 Racing slotted

Universal

23302

swiing® ingenious brake shoes Ø 90 x 18 Racing slotted

Manufacturer: swiing® ingenious parts · Ø drum: 90 mm · Width: 18 mm · Number of springs: 2 pcs · Springs included: Yes · Ø locating bolt: 10 mm · Slotted: Yes · Color: silver · Area of application: Racing

EUR 28.10

swiing® ingenious piston 40 mm | Cilo 502

For: Cilo

17840

swiing® ingenious piston 40 mm | Cilo 502

Manufacturer: swiing® ingenious parts · Ø outside piston (A): 39.93 mm · Compression height (C): 27.9 mm · Curvature (D): 5.1 mm · Total piston height (E): 54 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 40 mm · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Ø piston pin (B): 12 mm · Piston ring height: 2 mm · Thick piston ring: 1.65 mm · Weight piston kit: 93 g

EUR 85.70

swiing® ingenious Drag Pipe 45° black Ø 28 / 70 mm

Universal

23442

swiing® ingenious Drag Pipe 45° black Ø 28 / 70 mm

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: powder-coated · Ø outside: 70 mm · Total length: 670 mm · Color: black · Ø Internal connection: 28 mm · Exhaust type: Dragpipe / sharp end · Mounting type: Screwed clamp

EUR 122.40

swiing® ingenious Drag Pipe 45° Chrome Ø 28 / 70 mm

Universal

23443

swiing® ingenious Drag Pipe 45° Chrome Ø 28 / 70 mm

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Ø outside: 70 mm · Total length: 670 mm · Color: Chrome · Ø Internal connection: 28 mm · Exhaust type: Dragpipe / sharp end · Mounting type: Screwed clamp

EUR 122.40

swiing® ingenious Drag Pipe 45° black Ø 32 / 70 mm

Universal

23444

swiing® ingenious Drag Pipe 45° black Ø 32 / 70 mm

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: powder-coated · Ø outside: 70 mm · Total length: 670 mm · Color: black · Ø Internal connection: 32 mm · Exhaust type: Dragpipe / sharp end · Mounting type: Screwed clamp

EUR 122.40

swiing® ingenious fan blade, black (EVO, HPI, Bosch, Ducati) | Sachs 50/2, 50/3

For: Sachs

23463

swiing® ingenious fan blade, black (EVO, HPI, Bosch, Ducati) | Sachs 50/2, 50/3

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Ø outside: 110 mm · Ø inside: 39 mm · Ø mounting hole: 6 mm · Ø bolt circle: 48 mm · Number of fixing points: 6 pcs · Height: 25 mm · Weight: 116 g · Alternative version of the Pony OEM number: A1026 · Alternative version of the Sachs OEM number: 0211 070 105

EUR 73.40

swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo

For: Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo

23464

swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Ø inside: 39 mm · Ø outside: 120 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Number of fixing points: 10 pcs · Height: 13.5 mm · Weight: 87 g

EUR 73.40

swiing® ingenious exhaust manifold 28 mm chrome | Puch Supermaxi LG1, LG2

For: Puch

23448

swiing® ingenious exhaust manifold 28 mm chrome | Puch Supermaxi LG1, LG2

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Ø inside: 25.5 mm · Ø outside: 28 mm · Total length: 300 mm · Color: Chrome · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs · Hole spacing outlet: 40 mm

EUR 48.90

Hot

swiing® ingenious 38 mm cylinder kit (CH12 Vertex-Edition) Tuning camouflaged | Puch

For: Puch

21501

swiing® ingenious 38 mm cylinder kit (CH12 Vertex-Edition) Tuning camouflaged | Puch

Manufacturer: Vertex · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 50 ccm · Nominal diameter: 38 mm · Ø cylinder neck: 48 mm · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Inlet window: 24 / 21 x 15 mm · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 20 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Hole spacing outlet: 42 mm · Outlet type: straight · Number of fixing points: 4 pcs · Thread outlet: M6x1 (standard thread) · Area of application: Tuning · Alternative version of the Puch OEM number: 349.7.10.105.0

EUR 171.50

Hot

swiing® ingenious degree disk moped | Bosch, Ducati, EVO, HPI, MVT, PVL, Selettra

Universal

18196

swiing® ingenious degree disk moped | Bosch, Ducati, EVO, HPI, MVT, PVL, Selettra

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Thickness: 1 mm · Area of application: Measuring tool

EUR 30.50

swiing® ingenious pull starter EVO & HPI ignition (210) | Puch E50

For: Puch

23580

swiing® ingenious pull starter EVO & HPI ignition (210) | Puch E50

Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Color: black · Ignition system: HPI · Ø outside: 130 mm · Number of fixing points: 2 pcs · Hole spacing: 137.5 mm · Height: 93 mm · Total length: 160 mm · Width: 135 mm

EUR 183.70

swiing® ingenious brake shoes Ø 80 x 18 Racing slotted | Puch Maxi

For: Puch

23581

swiing® ingenious brake shoes Ø 80 x 18 Racing slotted | Puch Maxi

Manufacturer: swiing® ingenious parts · Ø drum: 80 mm · Width: 18 mm · Number of springs: 2 pcs · Springs included: Yes · Slotted: Yes · Area of application: Racing

EUR 24.40

swiing® ingenious brake shoes slotted Ø 90 x 18 spoke wheel front | Piaggio Ciao, Bravo, Boxer

For: Piaggio

23583

swiing® ingenious brake shoes slotted Ø 90 x 18 spoke wheel front | Piaggio Ciao, Bravo, Boxer

Manufacturer: swiing® ingenious parts · Ø drum: 90 mm · Width: 18 mm · Number of springs: 2 pcs · Springs included: Yes · Slotted: Yes · Area of application: Racing

EUR 28.10

swiing® ingenious brake shoes Ø 90 x 18 Racing slotted | Sachs

For: Sachs

23582

swiing® ingenious brake shoes Ø 90 x 18 Racing slotted | Sachs

Manufacturer: swiing® ingenious parts · Ø drum: 90 mm · Width: 18 mm · Number of springs: 2 pcs · Springs included: Yes · Slotted: Yes · Area of application: Racing

EUR 28.10

swiing® ingenious connecting rod racing Ø 16 mm bolt | Sachs

For: Sachs

23591

swiing® ingenious connecting rod racing Ø 16 mm bolt | Sachs

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: ground · Connecting rod length center-center: 85 mm · Total length: 111 mm · Ø piston pin (B): 12 mm · Ø Connecting rod bolt: 16 mm · Ø lower connecting rod eye outside: 28.8 mm · Ø upper connecting rod eye outside: 23.4 mm · Ø lower bearing inside: 21 mm · Ø inside upper bearing: 15 mm · Dimension lower bearing: 16/21 x 9.7 mm · Dimension upper bearing: 12/15 x 14.2 mm · Connecting rod pin length: 30 mm · Thickness: 10 mm · Area of application: Tuning

EUR 59.90

swiing® ingenious wheel bearing 12/29/9 spoke & cast rim | Puch Maxi

For: Universal · Puch

22374

swiing® ingenious wheel bearing 12/29/9 spoke & cast rim | Puch Maxi

Bearing type: Deep groove ball bearing · Ø inside: 12 mm · Ø outside: 29.02 mm · Width: 9 mm · Inner ring width: 9 mm · Ball bearing closed: Yes · Manufacturer: swiing® ingenious parts · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CN (standard) · Bearing cage: Sheet steel cage ball-guided · Material: Plastic · Material: Steel

EUR 10.90

Hot

For: Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Zündapp Belmondo · DKW · Kreidler

23660

swiing® ingenious "Expert" motor stand

Manufacturer: swiing® ingenious parts · Area of application: Motor bracket · Material: Steel · Surface: varnished · Color: red · Color: white · Total length: 370 mm · Width: 245 mm · Height: 340 mm · Material thickness: 3.5 mm · Ø Receptacle: 25 mm · Ø Receptacle: 35 mm · Hole spacing: 21.5 mm

EUR 91.80

swiing® ingenious motor mount | Puch Velux

For: Puch

23662

swiing® ingenious motor mount | Puch Velux

Manufacturer: swiing® ingenious parts · Area of application: Motor bracket · Material: Steel · Surface: galvanized (blue)

EUR 73.40

swiing® ingenious exhaust flange Ø 31 mm (no gasket) | Puch

For: Puch

16462

swiing® ingenious exhaust flange Ø 31 mm (no gasket) | Puch

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: raw · Ø inside: 31 mm · Ø outside: 39 mm · Ø outside: 62 mm · Place of use: Outlet · Ø mounting hole: 6.5 mm · Hole spacing: 42 mm · Thickness: 5 mm

EUR 14.60

swiing® ingenious carburetor set 15 mm (Bing SRE) | Puch X30 NS, NL

For: Puch

20141

swiing® ingenious carburetor set 15 mm (Bing SRE) | Puch X30 NS, NL

Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Mounting type: Flange · Mounting type: Plug connection clamped · Hole spacing inlet: 38 mm · Clamping screw torque (max.): 4 N/m · Area of application: Tuning

EUR 131.00

swiing® ingenious 16 mm carburetor set (Dell'Orto SHA) | Puch X30 NS, NL

For: Puch

20142

swiing® ingenious 16 mm carburetor set (Dell'Orto SHA) | Puch X30 NS, NL

Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Carburetor type: SHA · Nominal diameter: 16 mm · Ø Inside entrance: 16 mm · Ø Output inside: 16 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Flange · Mounting type: Plug connection clamped · Hole spacing inlet: 38 mm · Area of application: Tuning

EUR 159.20

swiing® ingenious gasket set Airsal 43.5 mm cylinder | Beta 521 & 512

For: Pony / Cilo (Beta 521 & 512)

20164

swiing® ingenious gasket set Airsal 43.5 mm cylinder | Beta 521 & 512

Manufacturer: swiing® ingenious parts · Area of application: Tuning · Number of components: 3 pcs · Ø cylinder: 43.5 mm · Hole spacing outlet: 42 mm

EUR 18.30

Other mofakult brands

swiing® Revival Parts

swiing® Revival Parts brings the history of mopeds to life with original parts that are manufactured with Swiss precision and attention to detail. Each component is based on the original standards and manufactured using the latest technology to ensure the highest quality and durability. This is how tradition is preserved – for all those who appreciate the original and rely on proven craftsmanship.

GPO – GOOD PARTS ONLY.

We created GPO because we have experienced enough ourselves as mechanics, riders, and enthusiasts: Parts that don't fit. Quality that doesn't last. Prices that nobody understands anymore. GPO stands for honest spare parts: No gimmicks. No unnecessary bells and whistles. Only parts that fit. Period.

66HEROES

Mainly not original. Custom parts from 66HEROES add the finishing touches to your customised look. After all, it's the details that turn a beautiful motorbike into your personal gem.

mofakult Merch

No matter where you are, your love for the moped or the cult beats too strongly not to show it. Everyday fun for absolute fans.